Former Bob Jonkman -- Please use the new server at https://gs.jonkman.ca on sn.jonkman.ca

This remote profile is registered on another site; see bobjonkmanformer's original profile page on sn.jonkman.ca.

1. Former Bob Jonkman -- Please use the new server at https://gs.jonkman.ca (bobjonkmanformer)'s status on Saturday, 04-Feb-2017 20:53:20 EST Former Bob Jonkman -- Please use the new server at https://gs.jonkman.ca

   Remote profile options...

   • LinuxWalt (@lnxw48a1) {3EB165E0-5BB1-45D2-9E7D-93B31821F864}
   I once helped set up a #Usenet node connected with UUCP. Usenet was available to anyone who had bandwidth and storage. It was much later when people with bandwidth and storage started charging people who only had news clients...
2. Former Bob Jonkman -- Please use the new server at https://gs.jonkman.ca (bobjonkmanformer)'s status on Saturday, 04-Feb-2017 20:32:07 EST Former Bob Jonkman -- Please use the new server at https://gs.jonkman.ca

   Remote profile options...

   • Archaeme
   Remember when #Usenet used to be a free service?
3. Former Bob Jonkman -- Please use the new server at https://gs.jonkman.ca (bobjonkmanformer)'s status on Saturday, 04-Feb-2017 20:31:17 EST Former Bob Jonkman -- Please use the new server at https://gs.jonkman.ca

   Remote profile options...

   • nybill
   And to answer my own question, with R=3.8E7 then the current at the start was 30V/R = about 0.8 uA, and at the end 13V/R = about 0.3 uA
4. Former Bob Jonkman -- Please use the new server at https://gs.jonkman.ca (bobjonkmanformer)'s status on Saturday, 04-Feb-2017 20:20:15 EST Former Bob Jonkman -- Please use the new server at https://gs.jonkman.ca

   Remote profile options...

   • Stephen Sekula
   @steve@chirp.cooleysekula.net That's a lovely analysis! If the leakage could be due to the dielectric's resistance, wouldn't the observed leakage be due to *both* that and the leakage through air? Then the calculated resistance would be that of dielectric and air in parallel...
5. Former Bob Jonkman -- Please use the new server at https://gs.jonkman.ca (bobjonkmanformer)'s status on Saturday, 04-Feb-2017 19:02:08 EST Former Bob Jonkman -- Please use the new server at https://gs.jonkman.ca

   Remote profile options...

   • Douglas A. Whitfield
   I've been more of an #OpenNMS guy up to recently. But the old (PIII 700 MHz) box that was running OpenNMS couldn't keep up with the #Java engine requirements, and so that box (hostname "roddenberry") has been sent off to #ComputerRecycling
6. Former Bob Jonkman -- Please use the new server at https://gs.jonkman.ca (bobjonkmanformer)'s status on Saturday, 04-Feb-2017 18:05:56 EST Former Bob Jonkman -- Please use the new server at https://gs.jonkman.ca

   Remote profile options...

   • LinuxWalt (@lnxw48a1) {3EB165E0-5BB1-45D2-9E7D-93B31821F864}
   If #Microsoft !Windows continues to improve itself until it is entirely GNU+Linux compatible, then the !ReactOS folks could head them off at the pass and just merge in the Linux kernel now. #NotGonnaHappen #IHopeThatsNotGonnaHappen
7. Former Bob Jonkman -- Please use the new server at https://gs.jonkman.ca (bobjonkmanformer)'s status on Saturday, 04-Feb-2017 17:54:22 EST Former Bob Jonkman -- Please use the new server at https://gs.jonkman.ca

   Remote profile options...

   • silverwizard
   /me marvels that http://federation.definitelyreal.coffee/friendica is a real URL
8. Former Bob Jonkman -- Please use the new server at https://gs.jonkman.ca (bobjonkmanformer)'s status on Saturday, 04-Feb-2017 17:46:04 EST Former Bob Jonkman -- Please use the new server at https://gs.jonkman.ca

   Remote profile options...

   • nybill
   Remind me of the math. How much current can you pull from a 22000uF capacitor with 64V on it?
9. Former Bob Jonkman -- Please use the new server at https://gs.jonkman.ca (bobjonkmanformer)'s status on Saturday, 04-Feb-2017 17:40:18 EST Former Bob Jonkman -- Please use the new server at https://gs.jonkman.ca

   Remote profile options...

   • Kitchener Waterloo Linux User Group
   • silverwizard
   I've been promising to set up a #GNUsocial instance for !KWLUG, but I may investigate !Friendica instead. You up for a tag-team demo of Friendica for @KWLUG?
10. Former Bob Jonkman -- Please use the new server at https://gs.jonkman.ca (bobjonkmanformer)'s status on Saturday, 04-Feb-2017 13:16:46 EST Former Bob Jonkman -- Please use the new server at https://gs.jonkman.ca

    Remote profile options...

    • 桃
    @xj9@social.heldscal.la I remember CTRL+R and CTRL+T being used to start and stop a teleprinter I used WAY long ago, but Wikipedia tells me that XON and XOFF flow control was actually CTRL+Q and CTRL+S (all four keystrokes correspond to Device Control 1-4 in ASCII). Maybe my teleprinter was non-standard. But to answer your question, I don't really know. I was just passing on an in…
11. Former Bob Jonkman -- Please use the new server at https://gs.jonkman.ca (bobjonkmanformer)'s status on Saturday, 04-Feb-2017 12:53:55 EST Former Bob Jonkman -- Please use the new server at https://gs.jonkman.ca

    Remote profile options...

    • ana
    @ana@Indy.im I'll pass on your interest in a #LibreOffice User Group to Marc Paré, @MarcPar on Twitter. Where are you located?
12. nds (nds)'s status on Saturday, 04-Feb-2017 11:12:42 EST nds

    Remote profile options...
    I feel like if this had been written as an SF short story in 1995, it probably would have won a Hugo award: http://veekaybee.github.io/facebook-is-collecting-this/
13. Former Bob Jonkman -- Please use the new server at https://gs.jonkman.ca (bobjonkmanformer)'s status on Saturday, 04-Feb-2017 12:31:09 EST Former Bob Jonkman -- Please use the new server at https://gs.jonkman.ca

    Remote profile options...
    ♻ @ddribin Mind blown: Hit Ctrl-T while performing a long running `cp` command. Shows current input and output file and the percentage complete. ¶ via @NickInfoSec on #Twitter
14. Former Bob Jonkman -- Please use the new server at https://gs.jonkman.ca (bobjonkmanformer)'s status on Saturday, 04-Feb-2017 04:23:47 EST Former Bob Jonkman -- Please use the new server at https://gs.jonkman.ca

    Remote profile options...
    https://pbs.twimg.com/media/C3ySB4GUEAAJxFf.jpg !politics
15. Former Bob Jonkman -- Please use the new server at https://gs.jonkman.ca (bobjonkmanformer)'s status on Saturday, 04-Feb-2017 04:06:15 EST Former Bob Jonkman -- Please use the new server at https://gs.jonkman.ca

    Remote profile options...

    • Eric Duhamel
    ericxdu23@loadaverage.com I've got the non-i9300 Galaxy SIII, and it has a GSM radio. I'm hesitant to try !Replicant on it, for fear of creating a brick
16. Former Bob Jonkman -- Please use the new server at https://gs.jonkman.ca (bobjonkmanformer)'s status on Saturday, 04-Feb-2017 03:19:06 EST Former Bob Jonkman -- Please use the new server at https://gs.jonkman.ca

    Remote profile options...

    • LinuxWalt (@lnxw48a1) {3EB165E0-5BB1-45D2-9E7D-93B31821F864}
    #Evan had asked for volunteers to take over servers in the #PumpIO network about a year ago. I guess nobody stepped up to the task...
17. Former Bob Jonkman -- Please use the new server at https://gs.jonkman.ca (bobjonkmanformer)'s status on Saturday, 04-Feb-2017 03:17:35 EST Former Bob Jonkman -- Please use the new server at https://gs.jonkman.ca

    Remote profile options...

    • LinuxWalt (@lnxw48a1) {3EB165E0-5BB1-45D2-9E7D-93B31821F864}
    @lnxw48a1@nu.federati.net Hmm. You post shows up blank on my instance. And clicking on the link to your instance I find it's about !Sriracha sauce, too!
18. Former Bob Jonkman -- Please use the new server at https://gs.jonkman.ca (bobjonkmanformer)'s status on Saturday, 04-Feb-2017 03:08:48 EST Former Bob Jonkman -- Please use the new server at https://gs.jonkman.ca

    Remote profile options...

    • Anders Bateva
    @andersbateva@quitter.se But to actually answer your question, no, I don't know of any #GNUsocial instance with a (working) 2-way #Twitterbridge.
19. Former Bob Jonkman -- Please use the new server at https://gs.jonkman.ca (bobjonkmanformer)'s status on Saturday, 04-Feb-2017 03:07:42 EST Former Bob Jonkman -- Please use the new server at https://gs.jonkman.ca

    Remote profile options...

    • Anders Bateva
    My instance sn.jonkman.ca is supposed to have a two-way #Twitterbridge, but inbound (T->SN) mysteriously stopped working about a year after I set it up. The other instance on the same shared server, s.russwurm.org lost comms in both directions. One of these days I'll try purging the Twitterbridge-related tables in the DB, and see if that clears things up.
20. Former Bob Jonkman -- Please use the new server at https://gs.jonkman.ca (bobjonkmanformer)'s status on Saturday, 04-Feb-2017 03:01:25 EST Former Bob Jonkman -- Please use the new server at https://gs.jonkman.ca

    Remote profile options...

    • Eric Duhamel
    I hope a !Replicant spin for the Galaxy SIII (domestic variant) becomes available soon. Bought the GSIII specifically because it's listed on the Replicant supported devices page, but then found only the International flavour of the GSIII (i9300) is supported.

• After
• Before